My Chemical Romance.

My Chemical Romance. Gerard, Mikey and Frank all had drug problems. Mikey and Gerard, on top of that had alcohol problems. They got themselves better. They knew no one else could help them. What encouraged them to get better? Themselves, and the music. Ray had the absolutely awful job of having to watch them go through all of this, on top of him trying to be the perfect guitarist. Frank would do drugs over the weekend, and wake up on Monday not knowing anything that had happened. Mikey felt depressed alongside Gerard, and before shows they would heavily drink together to try and relieve the stress. I'm gonna get better. † – Gerard Way. Gerard had attempted suicide, which is not the place anyone wants to be. He called up his manager, Brian, and told him. Came out to him about everything, the drinking; the drugs; and how he has a problem. Brian had to talk him out of suicide while on the complete other side of the world to Gerard, until Gerard woke up the tour manager and they spoke together, until Gerard passed out. Ray was probably first to let Gerard know he had a bad, bad problem. Ray told him he needed help, and within 17 days of Gerard understanding that, he got sober again.The band had saved his life. The band had saved Frank Iero's life. Frank LIVES for the music, and nothing else. It's the music that keeps him alive. Mikey hit depression during The Black Parade, and had to leave the band for a while, so he could get better, and play the music once again with 3 of his best friends. The band inspired Mikey to get better. The band saved his life. Ray seriously went through so much, and he would still be either trying to make music in small, unknown bands to make himself happy. But he has My Chemical Romance. God only knows the path Ray might have taken if Gerard idn't call him up to be in the band. The band saved Rays life. My Chemical Romance are my idols because they're such caring, and inspirational men. They care about the music, each other , and safety of their fans. Do you think they'd have gotten themselves better if they were just in it for the money? If none of the music ment anything to any of them, but they just wanted money, like some bands today? No, they wouldn't. They'd have carried on drinking and doing drugs until they would take an even more serious and critical condition, and probably die. Thank you My Chemical Romance for being my idols and inspiring me.

Conditions to Effectively Leverage Technology for Learning Essay

Great leaders create results, inspire others and attain goals through their shared qualities such as vision, passion, decisiveness, commitment, influence, character and cooperation. Similarly, to foster academic success, all educational stakeholders ought to have a shared vision of what the can result to be and communicate this vision among themselves. To begin with, the principal plays a multifaceted and pivotal role in setting the path that school will take. This direction should not only be positive but also productive especially to the teachers. On the side of the students, it should provide the students with a vibrant learning environment. A comprehensive program ought to be instituted to cheer up, cultivate and sustain effective leaderships of schools for the realization and speeding up the achievement of the students. So as move the student’s achievement upwards, those endowed with their academic performance that is the teachers, principals, teacher educators and even district administrators are under obligation to be accountable for the students. For instance, New York City Department of Education won the 2007 urban education Broad prize since the entire district schools had performed well. The brawny leadership by the chancellor, mayor and the teachers union contributed much to the students’ achievement. Solidarity and sharing also foster the willingness of each leadership level and even the student fraternity to share knowledge, resources and accomplishments In order to achieve the above discussed shared vision, the educational leaders ought to be adequately empowered to assure the realization of the vision. To empower them undertaking leadership trainings that will boost accountability will be essential. These leaders have also adopted implementation planning to facilitate the effectiveness of their schools and also the learning process. They incorporate digital learning resources and information and communication technologies (ICT) for the creation of multiple learning opportunities and deeper understanding and exhibition of the contents of their curriculums. Most of the New York schools have availed high speed access internets, interactive white boards, LCD projectors and improved the right of entry to rolling laptop carts. These technologies have promoted the students’ skills in communication, fostered understanding in science and math and facilitating organizational skills. Consistent and adequate funding can not be ignored since for the academic achievements of the students, money is required to training the administrators, support the ICT infrastructure, other personnel and staff development and the installation of the digital resources. Although the State’s Legislature was reluctant to allot the necessary funds so as to constitutionally provide a sound basic education to each student, a divisional appeal saw the implementation of the same. District funds have been used to mould the school administrators into instructional leaders, change agents and civic leaders. This consistent funding, of around $428 million, has led to the excellence in the public schools in the entire district. Due to the increased use of the new technology in these schools, adequate technical support and a robust technical infrastructure are important. This will ensure that these technological infrastructures support the teachers’ work in a more realistic manner. Each student should be allowed equal access to the different technologies since each of the plays a totally different role from the other. This equity should be bias-free in terms of sex, ethnicity, students with special needs and also the disadvantaged. The universal technological participation supports engaged learning thus reducing the levels of inequality. Moreover, the district schools have ensured an apparent access to electronic networks and computers for the realization of a significant change in the classrooms. On-site technical support must also be easily accessible by the teachers since the support managers are bestowed with all-time assistance troubleshooting during and after lessons. Students can hardly achieve academically or benefit from the various technologies if their teachers are not conversant with them. Support has to be availed to these educators so as to make them choose the appropriate instructional strategies and technologies appropriately. This makes sure that the teachers are very comfortable and experienced in their demonstrations of these technologies. Additionally, they can integrate the technological knowledge in their curriculum and in fostering changes in the assessment methodologies. On-going professional development assists the teachers in learning how to use the new technology. Additionally, the teachers are able to unleash to the students meaningful instructions accompanied with relevant demonstration activities in class. The on-going professional learning is vital since single workshop training can not be sufficient for the teachers to learn and understand everything about the technology. Schools-proposed learning curriculums should aim and helping the students acquire superb communication skills so as to enable them to be in their expressions. This can be achieved through pencil and paper work, audios, animations and also videos. Moreover, it should facilitate the learners’ ability to analyze and interpret data, manage and prioritize classroom tasks, develop problem solving methodologies and utilize the acquired knowledge in identifying and mitigating probable risks. So as to ensure that the learning process is student-centered, their goals, expectations, population and their learning criteria should be identified prior. This will enable the education direct their efforts in satisfying them. In gauging the understanding level of the learners, various assessment and evaluation methodologies are incorporated. This appraises both the technological applications put in place and also the achievement of the student. Furthermore, the administrators get to know the adaptability, usefulness and appropriateness of the technology. Remedial actions are then taken at a later date to streamline the students in case of deviations. This evaluation is based on the National Education Technology Standards. Besides, a community stakeholders’ committee assesses the ideas that emanate from various educational stakeholders and those committee scrutinized proposals that go through are adopted by schools in the entire district. This committee also performs equity assurance and guidance roles. Other support policies and supportive external context have been set up to further student achievement. For instance, teachers are provided with classroom computers and also have also adopted the use of electronic grade-books. This has become a requirement so as to report on the students’ attendance trends. Moreover, daily log-ins has been instituted. In other cases, students and administrators have received rewards that are based on their performances.

Medieval Story Essay Example | Topics and Well Written Essays - 250 words

Medieval Story - Essay Example The way the story is told is the clue here: Boccaccio writes this as if Pamfilo, the first of his storytellers during those ten nights, is having a great time recounting his outrageous story. In those days, everything narrated in this tale is horrific, especially the corruption of a final confession to a priest. Pamfilo made this character sound entertainingly immoral, corrupt and evil. This is the first tale, which is meant to shock the listeners and prepare them for a series of scandalous stories. And it does: ‘Pamfilos story elicited the mirth of some of the ladies and the hearty commendation of all, who listened to it with close attention until the end.’ (Boccaccio 1348) [My italics.] They really enjoyed wicked tales. The listeners laughed because the way the tale was told suggested that Ciappelletto had a great time deceiving clients, traders and all those he came in contact with: he had a corrupt but wonderful life, full of the wealth he made from devious deeds. This vindicated him in the eyes and ears of the listeners, who were there only to enjoy themselves listening to shameful tales. In those days, it was even sinful to listen to a shameful story, and poking fun at the Church was considered risquà ¨ and entertaining. It was great fun, so the more wicked Ciappelletto sounded, the more he was redeemed, according to the

Chief Ethics Officer Assignment Example | Topics and Well Written Essays - 1250 words

Chief Ethics Officer - Assignment Example Ethics try to determine what people must do and the goals that they need to pursue. The Chief Ethics Officer is the most important person in the C-level executive suite (Vallabhaneni, 2008). This report tries to highlight the roles and responsibilities of the Chief Ethics Officer. It also tries to identify the parameter’s that is necessary to avoid organs and leadership toxicity. It talks about the leadership skills required to ensure implementation and success. The company chosen for the study is Ford Motors Company. Job Description of Chief Ethics Officer Ford Motors is recognized as a renowned car manufacturing company of the world. The company is headquartered at Dearborn, Michigan. Being the new Chief Ethics Officer of Ford Motors, the following are the things that need to be done according to his responsibilities. Since internationally corporate unethical behavior pervades in an uncontrollable manner, they can however be cured if the companies appoint the Chief Ethics Of ficer in order to lessen the impacts of such unethical behaviors (Tran, 2010). It has been proposed that the system where the Ethics Officer reports to the management needs to be changed in order that these officers can perform their task effectively. The ethics officer must be hired and fired directly by the corporate board of directors instead of the company management. This kind of change in the reporting environment helps to enhance the effectiveness and independence of the ethics officer. There are numerous organizations that create and maintain the ethics position. The main responsibility of the ethics manager or officer is to improve the organizational ethical performances. They need to advise and assist the corporate management in the development and maintenance of the codes of conducts. They also have the additional responsibility of providing ethics training, monitoring along with accountability programs (Hoffman & Et. Al., 2007). The major role and responsibility of the C hief Ethics Officer is that they need to develop an ethics manual that will clearly describe the procedures and the policies on conflict of interest and codes of conduct. The policies need to be such that it restricts regarding the acceptance and giving of the gifts and travel by procurement, marketing, contracting and sales personnel. The chief responsibility of the ethics officer would be to prepare the rules that require written disclosures of the executives’ financial condition along with the outside earned income activities. He needs to ensure that there is adequate transparency in matter of disclosure of the financial statements and the position of the firm to the shareholders. The protection of the property of the organization and the key information are other important roles of the ethics officer in Ford Motors. In addition to these, the officer needs to perform certain other functions as well. He needs to promote a positive ethical climate in the organization via his leadership skills. He needs to work with the internal audit departments for the development of the audit plans and identify the areas of audit that will address the ethical violations. Parameters Necessary to Avoid Organ and Leadership Toxicity It has been noted that in the recent days,

Linear Programming Assignment Example | Topics and Well Written Essays - 1250 words

Linear Programming - Assignment Example Brass Ltd. manufactures two products named Masso and Russo. These products require machining and assembly hours for their production. The available capacity of each of these hours is limited. Also there are government controls on the maximum output of each type. Under these constraints, the company needs to develop an optimal production plan. The company also needs to know the impact of marginal increase in the constraints on its profitability. The selling prices of the products are also controlled by the government though demand is unfulfilled. The first assumption of the above model is the assumption of independence. This implies that the production of both products is independent of each other and so is their impact on the number of machining or assembly hours. Therefore, the two effects can be added to each other. The second assumption is the assumption of linearity. In other words it is assumed that a linear relation exists between the number of products and machining or assembly hours. This assumption makes possible the use of linear programming model for the given problem. The optimal solution can be obtained by solving the above model through Excel solver as shown in Figure 4.1 (Taha, 2009). In the beginning, the number of products of each type is taken as 1. The objective function value is the decision variable as it needs to be maximized. The number of products is the output variable while the constraints are given by the various inequalities. Sensitivity analysis is performed to notice the impact of a marginal increase in the value of machining hours and assembly hours on the objective function. From the figure, it can be noticed that when the available capacity of machining hours is changed from 700 to 701 hours, the profit increases by $15. When the available capacity of assembly hours is changed from 1000 to 1001 hours, the profit increases by $10. This increase in profit with marginal relaxation of

CRM Research Paper Example | Topics and Well Written Essays - 1250 words - 1

CRM - Research Paper Example Company can market its product worldwide at nominal price through e–business. In addition, e-business ensures good and superior customer service which can encourage buyers to know more about any particular product of a company. Customers can make online payment and the products are delivered in their house. E–Business in Pharmaceutical Industry E–business strongly influences the strategies of pharmaceutical companies. Online sales and detailing can influence the sales of pharmaceutical company. Through e–business, pharmaceutical company develops branding, forecast sales, place & trace customer orders and influence supply chain management. Pharmaceutical company had developed website where information about doctors and medicines can be reviewed. Through e–business forum, people are able to share information and feedback about any drug or medicine. Many pharmaceutical companies had developed front end and back end e-business formation to trade their p roducts to business partners, customers, wholesalers and distributors. Custom e-business application is effective while ordering drugs and medicine products and requires extensive prescription data. E-business ordering, selling can be implemented using application which allows pharmaceutical company to draft complicated order over website (Qayyum, â€Å"eBusiness Technologies and Trends in the Pharmaceutical industry†). E–Business at Hanmi Hanmi had developed professional website for e–business solution. The website of Hanmi provides strong communication atmosphere and it is a good system for medical practitioners such as doctors, chemists or pharmacists. Through their website they can gain useful information. Hanmi Medical Portal (HMP) had accomplished sustainable development and became a major specialized medical website for many domestic doctors. HMP consists of intern, occupant and medical school students. It provides several essential services such as medic al information service, medical related social service, prerequisite for professional service and many allied & differentiated service. HMP is seeking to become the next generation growth technology of Hanmi Pharmaceutical Company and conquer the International Medical Portal Standard (Hanmi IT, â€Å"HMP†). Analytic Data Value In today’s competitive world, analytic collection of data has been widely used. Organization collects data from a wide range of source before extracting meaningful information from them. This is the challenge for every organization to deploy analytics and generate information from customer data. Many organizations are unsuccessful to achieve complete benefit of their customer data because of fault within the analytics capacity. The customer data analytic helps organizations to improve customer experience, sales and service. Hanmi had successfully developed software to properly manage customer data and derive important information from it. Hanmiâ €™s software solution helps to draw business results from customer data. It can provide dashboards, trend reports and pivot tables which can indicate key performance indicator of market and help company to measure the success factors. ubi – SFA technology Hanmi had implemented ubi-SFA approach

Enterprise Risk Management Essay Example | Topics and Well Written Essays - 1750 words

Enterprise Risk Management - Essay Example The reason lies in that it lacks the integrated approach to the management of risk which characterises enterprise risk management. It is precisely for this reason that regulators in Canada, Germany, the United Kingdom, the United States, and other developed countries have issued rules and guidelines that advocate an enterprise-wide approach to risk management, further pushing many companies to adopt ERM (Kleffner, Lee and McGannon, 2003). Quite simply stated, the drive towards the adoption of ERM, as opposed to RM is due to the fact that the integrated approach adopted by the former, and which is absent within the context of the latter, is regarded as a more effective and efficient approach to risk management. With that being the case, as this research will argue, the real question relates to the reasons why more corporations do not adopt ERM, as opposed to RM. In order to properly determine the reasons why ERM is considered superior to RM, it is important to define each of the two terms. These definitions will highlight the advantages and disadvantages of either approach and allow for a greater understanding of differences between them. Enterprise risk management has become a significant topic for larg... It provides an active, vital and comprehensive modelling approach for integrating all financial decisions and risks. This includes investment decisions, borrowing policies, liability, and setting of goals (Kleffner, Lee and McGannon, 2003). The comprehensive management of risks and the adoption of an integrated approach to risk management has several benefits. An enterprise with fully diversified losses requires much less capital than an enterprise with concentrated worst-case losses. In turn, the anticipated profitability of the company is affected by the degree of diversification since a reduction in capital will increase expected profits. The goal of ERM is to maximize the firm's overall profit, while maintaining its enterprise risks at acceptable levels (Mudge, 2000). Insurance companies, for example, should analyze their major risks so that adequate capital exists at the firm level to pay insurance policyholders in the event of legitimate insured losses. The desired level of capital depends upon the severity of claims. And since these claims are a direct function of random events, the insurance company must calculate a distribution of losses for its entire operations in order to set the proper level of firm-wide capital (Doherty, 2000). Due to this, Meulbroek (2002) insists that regulatory bodies should check these systems in order to validate that the risk management strategies are reasonably well developed and consistent with current approaches and practice. The firm-wide models are also known as Dynamic Financial Analysis. An ERM system consists of three primary elements. These are 1) a stochastic model for projecting a set of scenarios of the future --the scenario

Ethics in International Business Research Paper

Ethics in International Business - Research Paper Example Ethical development is more of an intrinsic process and it cannot be captured through the printed literature. Knowledge of ethical theories and practical experience enable an individual to face the critical situations, in personal life or in business situations and enable one to determine which ethical characteristics need to be adopted. Ethics in international business will not accrue through learning theory alone. A number of practicalities are involved as the international business platform is most volatile on many counts. But one thing is certain. It is in the interest of all concerned, international businessmen, policymakers and politicians involved in business decision making, to learn and execute ethical practices. Accountability and ethical principles need to go in tandem which will contribute to the overall welfare of the global business community in particular and global family of humankind in general. International business has the potential to enhance the country’s capacity to produce goods as well as to export or import them. The Friedman Doctrine is aptly described by Campbell Jones (2005). He dissects the doctrine into three parts and writes, â€Å" First, Friedman explicitly recognizes that capitalism is marked by conflict of interest†¦this conflict of interest is clearly expressed between business and labor†¦.increasing profit is the responsibility of business, and protecting the interests of labor is the responsibility of labor leaders. Between these two groups, there is an unassailable conflict of interest which is a matter of politics and this cannot be wished away by economists or business ethicists.†(p.98) Describing the position of the state and about the social responsibility of the organizations, he elucidates, â€Å" Second, Friedman does not think that the state is a bad thing that should be done away with as if capitalism could continue without the state†¦.Indeed, one of the reasons that Friedman is conc erned about business people exercising functions of ‘social responsibility’ is that these business people have not been democratically elected for the purposes of representing the community at large, are, therefore, unlikely to represent the broader interest.†(p.98) And on the ethical issues relating to business, he does the tightrope walking and states, â€Å"Third, Friedman expands on the earlier noting that business can engage in competition, ‘so long as it stays within the rules of the fame†¦the desire of business will be to make as much money as possible, ‘while conforming to the basic rules of society, both those embodied in law and those embodied in ethical custom.†(p.99) This coverage is comprehensive. Milton Friedman (1970) offers detailed comments and expands his arguments, â€Å"Presumably, the individuals who are to be responsible are businessmen, which mean individual proprietors or corporate executives. Most of the discussion of social responsibility is directed at corporations, so in what follows I shall mostly neglect the individual proprietors and speak of corporate executives.† (The New York Times)This needs further clarifications. A corporate executive is an employee of the owners of the business and his primary and direct responsibility is to them.  Ã‚  

Polite and gracious Essay Example for Free

Polite and gracious Essay For the first time in my life things seemed to be looking on the bright side and then, just like usual, it was torn away from me by a selfish, ignorant Mr.Birling. I had been doing well at the works, had only recently been promoted as the leading officer, a head of a group of girls. I was in charge of them and got to know them well, there was Betty, Martha, Lucy, Agatha, Emma, Vicky and quite a few others. Marthas the nicest. Shes an orphan, like me so I guess. Well, during the short holiday in the summer, we got talking about our wages and how most of us were barely scraping by on the measly 22 6pence we got. I mean we were only just surviving and its no good just being able to survive, we wanted to live! Other people do so why cant we! So seeing as we shouldnt be treated as cheap labour, but people we decided to go to Mr.Birling himself and ask for 15 shillings instead. But as he is mean and penny pinching he refused blankly. Said he wouldnt even consider it! After that it only gets worse. Stupid as we were we went on strike hoping that that would show him but of course how could we manage having just been on holiday. We were all even more broke then usual, so the strike having failed miserably we had no choice but to go back to the works.  But No! It wasnt as simple as that, life never is. Of course he wouldnt accept us ringleaders back and came down himself and told us to clear out! I had a lot to say to that Mr.Birling but he wouldnt even listen to a word of it! Sent us packing right on the spot. If only he would have listened to me, Id have told him a thing or two! God, there is so many thoughts and questions running round my head! There is so much I want to say to people, but no one will listen. There are so many others just like me out there, who struggle and suffer simply because of the conditions they work in and the measly wages they receive but no one dares do anything about it. Why shouldnt we try for higher wages? Its unjust that we should be sacked just for having a little more spirit than the others!  But who am I kidding? Im just lower class, cheap labour, scum. Im meant to just accept that thats the way it is. Dont try and go against it, dont ask questions, dont do any thing but just take whats given you. Maybe it is Gods will for me to end up like this, just like it was for my parents. Im angry and frightened and dont know what to do. I have looked for almost 2 months for some kind of work but it is scarce and hard to get, Im living in lodgings which I cannot do for much longer, I have no money saved, not one penny, no family, few friends, no home to go back to, Im lonely and scared, stuck in a rut, unable to climb any where higher or better. No one to turn to for support or comfort apart from the lord some may say. But when out of the many times I have begged him to help me had he answered my prayers? Never. Enough of this miserable complaining. When has it done anybody any good? I guess Eva Smith is better than this (or I shall try to be). Just because some mean selfish man made me lose and job, that I hardly enjoyed any way, doesnt mean I have to throw everything away and stop living! I will try! Tomorrow I will continue looking for a job although if I shall succeed I do not know, but it is better than sitting here counting the pennies in the dark. I have never been so happy! Last week at last, my dream came true! No more cold nights, no more hungry bellies, no worrying if Ill make it till tomorrow, I am at last safe! I have eventually found a respectable, fairly well paid, secure job at one of the best, and most expensive shops around. Milwards! Every body goes there. No, not only every normal body but every rich, prosperous noble body! Its a wonderful stroke of luck, I really couldnt of asked for a better job! Its lovely working there, Im treated like a normal human being for once. Its an amazing change from the factory where I would be surrounded by loud machinery drilling into my head, people moaning and sweating, horrible smells, shouts and cries, no escaping from it. But now its completely different. Everywhere I look I see beautiful, clothes hanging rail by rail and whereas before the most I could do was longingly stare into shop windows I can now actually hold these gorgeous dresses and if Im lucky, try them on! I may even start saving up for one even though it would take a long, long time. Lovely people talk to me there and theyre ever so polite and gracious. They no longer look at me as if Im some piece of dirt but almost as if Im one of them. I feel like Ive entered a different world, a world with out suffering and pain. I see this as a good fresh start for a new life, a new road now lies ahead of me. This job is a lot better pay (I now get 95 shillings a week!) so I can now start looking to try and rent a place out for my self but the first thing I will do is go a buy my self a nice juicy steak with some of this weeks wages. Its been so long since Ive had a proper, tasty meal, I can feel my mouth watering just thinking about it. Well enough about food. I have been thinking recently that its about time I tried to find my self a husband. I look around me and everywhere I see are happy couples arm in arm. I know my parent would have wanted me to find a nice young man and now Im working in respectable job I can hopefully find one who isnt too badly well off and quickly settle down happily. I can see myself, in a few years time, married to a works manager of some sort. Hed be tall and dark and have beautiful blue eyes. Hed be ever so loving and caring to me and would never treat me badly. Wed have two lovely children, a girl and a boy, and we would live in the biggest, most beautiful rose covered, marigold house, along pixmore lane.

The importance of Pompeii today Essay Example for Free

The importance of Pompeii today Essay QNo1:1a: The volcanic eruption results in the loss of people’s life and home making their families helpless and homeless. Sometimes it destroys the village under the ash or lava. 1b: On the 24th August in the year AD 79, the people of Pompeii were going about their business in the usual way. Suddenly it grew dark a great was leaving the top of mountain. The people of Pompeii started to run out of the town, but more than 2000 of them didn’t get for. Stones and cinders began to fall on the town and the town was completely buried. 1c: The importance of Pompeii today is that the Italian government has very carefully cleared away the volcanic matter to uncover public buildings, private houses, shops and market places. We can see where people lived and how they live and can make a picture depicting of their culture. From the body of a Roman soldier which was found by the archaeologist we can, today, understand the people of that time and the things they possessed at that time. 1d: The people who have been living near volcanoes know the merits of the soil formed by the condensation of the matter erupted by the volcanoes, how fertile that is. 1e: Tristan da Cunha was a living island which had erupted many time and forced people to leave their places. The volcano was dormant. QNo3: (i) Erupting – suddenly coming out of something – volcano has started erupting. (ii) Cinders – a piece of material that is left after something such as wood or coal has burned – the ash is occupied from cinders. (iii) Extinct – a volcano that is unlikely to erupt – extinction is a fact of living. (iv) Dormant – something that is not active – the volcanoes after losing capability of Eruption become dormant. (v) Lava – a kind of rock which comes out of volcano in the form of a very hot liquid lava after cooling becomes solid rocks. QNo4: A Country I Would Like To Visit I have a craving to go to a foreign country. The very thought sends a wave of thrill in me. I feel that a visit to some foreign country will add to my knowledge of men and manners and I shall be able to know more of the world and its geography. There are a number of countries where people generally go. There is U.S.A., the richest country of the world. It is a land of skyscrapers, crime and affluence, to is said that out of every two families there one has got a car. There is the United Kingdom, whose inhabitants ruled over India for over a century and fleeced her of all her wealth. There is Russia—a super power, the leader, of the countries with Communist ideology. Japan, too, is a country which has fascination for some. Japan is once again making rapid strides towards industrialization after the mishap of Hiroshima and Nagasaki. During the Second World-war two American bombs had razed them to the ground and brought Japan to her knees. Germany, too, is advancing rapidly towards industrialization. Which country I would most like to visit? Well, I have no particular fascination for the United Kingdom. The reason is simple enough. I have heard so much about the country from my friends and relatives who have been there that I feel there would be nothing new for me to see. The visit to Russia is out of question. Undoubtedly, Russia is a great country. She has made great progress in science and technology. Yet its way of life is not congenial to my taste. It is a Communist country. There is no liberty of speech. Adverse criticism is not tolerated. The country I would most like to go is the U.S.A. Not that it is a rich country. The Americans are the best people in the world. There is no formality in their behaviour. If India is now able to tide over her problem  it is all due to American help. Food grains worth billions were imported from that country and the food problem is all but solved. It is also helping the country with the technical knowhow in some of the major industries. The Americans also speak the English language which I can speak and write with ease. I have therefore, decided to go to America as and when I get an opportunity to do so. QNo5 : (i) Friend: Hey, I told you about that problem. Me: Which one? Friend: About my dad’s broken car. Me: Yeah. So? Friend: What should I do now? Me: What can I say May be you should talk to your dad about it. Friend: Shall I lie to him? Me: No. Just don’t make this situation worst by lying to your dad about it. Friend: So? Me: Go and tell him the truth. Tell him what happened and how that happened. Tell him that it was neither yours nor the opposite driver’s fault but because of the slippery road. Friend: Will that be ok? Me: Yeah. I think so. Friend: Okay. Thanks brother for the advice. (ii) Mother: Vacations are not about sleeping late and watching TV all day. You can take up photographs, learn an instrument, learn judo Son/Daughter: I really worked hard for my exam. I do want to rest. Mom: Okay. I know but I will not allow you to watch TV all day and do nothing. Son/Daughter: But mom Mother: No. I don’t want to listen anything now. Son/Daughter: Ok fine. I’ll do something but not today, by tomorrow, I promise. Mother: Are you lying to me? Son/Daughter: How can I! Mother: Okay. But only today you can keep being lazy. Son/Daughter: Thank You! You are the sweetest mom in the world. Mother: Okay Okay Now stop buttering. QNo7: (i) the, a (ii) a, a, an, a, the, the, the, the QNo8: (i) to help (ii) playing (iii) to catch (iv) cooking (v) to work (vi) driving (vii) to go (viii) lending (ix) to buy (x) listening QNo9: 1 were. 2 had prepared. 3 arrived. 4 discovered. 5 had reserved. 6 had not had. 7 had given. 8 had also misunderstood. 9 required. 10 suspected.

Working Together To Safeguard Children

Working Together To Safeguard Children For the purpose of this assignment I will focus on the publication Working Together to Safeguard Children (2006) and the General Social Care Councils Code of Practice for Social Care Workers (2005) to critically evaluate and explore how they impact upon the role of the social worker whilst carrying out initial enquiries. The social work profession promotes social change, problem solving in human relationships and the empowerment and liberation of people to enhance well being, utilising theories of human behaviour and social systems. Social work intervenes at the points where people interact with their environments. Principles of human rights and social justice are fundamental to social work (International Association of schools of social work and international Federation of Social Workers 2001). Social workers act as negotiators between the individual service user and the wider society in order to assist the individual with the problems they are facing. This is performed by professionals utilising theories, their own values and beliefs of human behaviour and social systems (International Association of schools of social work and international Federation of Social Workers 2001). Working Together to Safeguard Children (2006) provides guidance for professionals who are working with children and their families to assists them in their safeguarding practice. This document places emphasis on the need for joint working as this provides a variety of knowledge, theory and skill when working with children and their families. The General Social Care Council (GSCC) identified codes of practice that aim to raise the standards in social care services, highlighting the responsibility of social care workers and their employers to ensure that the codes are followed within practice. The General Social Care Council (2005) highlighted that the Codes of Practice were to reflect the existing good practice of professionals and shared the standards and ethical practice to which they aspired. The main aims of the Code of Practice are to inform services users and the public of the standards that they can expect from social care workers and to provide social care workers with clear lines of accountability, therefore ensuring that workers are aware of the responsibility upon them to ensure that these conduct do not fall below the standards expected of them as this can lead to the dismissal of workers (GSCC 2002). Social workers are challenged on a daily basis to uphold the Codes of Practice while implementing government policies and procedures and have the responsibility for making difficult decisions and recommendations that will ultimately affect and impact upon the lives of children and their families. It is therefore critical that professionals are able to make these decisions by drawing and reflecting upon guidance to enable professionals to make ethical and sound decisions in the best interest of the child and their family. Social workers have to accept and be accountable for all their actions and need to be able to explain why they have acted in a certain way. Therefore social workers need to have a good understanding of how nature and society affects the way in which they practice enabling them to work competently and efficiently. Social workers strive to ensure that children are protected from harm as best they can and in order to do so social workers are trained and led by policies and procedures set out not only by the government but also from within the employing authority. The law also forms an essential part in the decision making process to ensure that children are not subject to significant harm. Professionals have a duty to investigate and complete initial enquiries under Section 47 of the Children Act 1989, if there is reasonable cause to suspect that a child whom is living or found within the local area is believed to be suffering, or is likely to suffer significant harm (HM Government 2006). The Children Act 1989 introduced Significant Harm as the threshold that justifies compulsory intervention and determines if a child is made subject to a protection plan or provided with support in the children and families arena (OLoughlin OLoughlin 2008) therefore a child may be supported on a child in need basis. The process will begin at the referral stage which is the first point of contact when information and or concerns are brought to the attention of Childrens Services, this can include a case that is already open to the associated local authority if there are an accumulation of concerns or a pre birth assessment indicates significant harm to an unborn child (DOH 2006). A team manager and a lead social worker will be allocated to the case and a decision will be made as to whether or not there are concerns which could pose potential or actual harm to the child, if this is so then a decision will be made to proceed to a strategy meeting and will be recorded at this point by management. A strategy meeting should involve Childrens services, Police, Education, Health and any other relevant agencies who are working with the family. Working in partnership with all professionals involved is essential as sharing information helps to build a clear picture of the child, family unit and the issues causing concern, thus promoting the safety and well being of the child (Children Act 1989). However in some instances this sharing of information is done without the consent of the parents which immediately conflicts with the code of practice set out by the General Social Care Council (2005) as it states that the rights and interests of the service user must be protected, respecting and maintaining the dignity and privacy of the service user. Already there is a contradiction starting between the Working Together to Safeguard Children guidance and the Codes of Practice. Another conflict emerges if the outcome of the strategy is to proceed with a Section 47 enquiry, due to Working Together to Safeguard Children (2006) stating that; Parents and those with parental responsibility are informed of concerns at the earliest opportunity, unless to do so would place the child at risk of significant harm, or undermine a criminal investigation and that as parental consent has not been obtained any work done should be practiced in a manner which allows for future working relationships with the family. This sounds plausible and is aimed to be in the best interests of the child however it conflicts with the Codes of Practice (2005) which state that; a social care worker must strive to establish and maintain the trust and confidence of service users. As a social worker it is incredibly difficult to uphold the Codes of Practice whilst following the guidance of Working Together to Safeguard Children, due to not being able to be as open and honest during the initial contact as possible. The rationale for this is that the only information to be provided to the family is that, that is agreed within the strategy meeting (HM Government 2006). Whilst carrying out a Section 47 enquiry it is essential that the child in question is spoken to alone as this gives the child the opportunity to express their wishes and feelings and allows professionals to gather further information. If the child is not spoken to alone it reduces the ability to appropriately assess the needs and risks surrounding the child. When speaking to the child it is imperative that discussions are practiced in a way that minimises distress but maximises the likelihood that they will provide accurate and complete information as gaining the childs views can be critical in the prevention of significant harm (HM Government 2006). Clearly stating that professionals are able to speak to children without the consent of parents or anyone with parental responsibility, if there is evidence that the child would be placed at further risk should the parents be informed. Consequently social workers are following the guidance from Working Together to Safeguard Children yet disregarding the Codes of Practice which places a duty on the social worker to communicate in an appropriate, open, accurate and straightforward way (GSCC 2005). Section 47 enquiries may include a medical examination and failure to consent from the parents or failure to allow the child to be seen in general may result in the professionals having to make an application to the Court in respect of being granted appropriate orders such as an Emergency Protection Order or Assessment Order, professionals will be directed by legal professionals in this instant. Once again there are conflicts within this, in respect of the Codes of Practice, by attending Court and seeking an order, families may feel that they are not being listened to or their wishes respected, in some scenarios it may be felt by services users that their privacy and dignity is not being respected. However there is one Code of Practice that has some similarities to Working Together to Safeguard Children; taking necessary steps to minimise the risks of service users from doing actual or potential harm to themselves or others (GSCC 2005). It may also become evident when completing a Section 47 enquiry that the child in question and siblings if any, may need to be accommodated whilst subsequent assessment are complete. The local authority will whenever possible attempt to ensure that the child can remain at home and appropriate steps will be taken to ensure the childs safety, however there are times when the risk is such that there is no other option than to remove the child from the family home (HM Government 2006). There is a clear contrast to the Codes of Practice as they state that service users have the right to take risks hence placing professionals in a position whereby they need to make decisions as to whether the risks can be managed without leaving the child at risk of further harm. As a social worker you are faced with conflict and dilemmas when attempting to work in accordance with both Working Together to Safeguard Children and the Codes of Practice. This leads to dilemmas in practice that require consideration and in order for social workers to make sound and professional judgements it is essential that social workers have regular supervision to aid their practice, allow them to reflect on decisions made, look at various interventions and possible outcomes. Supervision allows for social workers to ensure that they provide effective and efficient work with children and families. Working within child protection is complex and the need to share information is vital therefore any decisions that are made with regards to children should be done so in a multi-agency manner. This aims to ensure that professionals are not individually held accountable for failure to work in accordance with the Codes of Practice and government guidance while incorporating inter-agency working, which is fundamental when combating child abuse (Working Together to Safeguard Children 2006). The Codes of Practice (2005) express the need for social worker to be accountable for their own work, this includes the need for social workers to recognise and respect the roles and expertise of other professionals and work in partnership with them. Joint supervision with professionals in a similar field gives the opportunity to share knowledge and skill an may cover something the fellow professional has failed to notice therefore providing and even best quality of service to the public. It has become abundantly clear throughout this assignment that social work is ever changing and that the decision making process, individually or jointly between professionals is never easy, especially when it involves the lives of children and young people. Adhering to The Codes of Practice whilst also adhering to government guidance, simply, causes conflict in practice this is something that may never change and as a social worker it is imperative to note this and whilst following policies and procedures we must not forget that the children we are trying to protect and the families that they belong to are people, human beings with feelings, rights and deserve to be treated correctly.

Einleitung :: essays research papers

Einleitung Unser Zeitalter ist das eigentliche Zeitalter der Kritik, der sich alles unterwerfen muss. Religion, durch ihre Heiligkeit und Gesetzgebung durch ihre Majestà ¤t, wollen sich gemeiniglich derselben entziehen. Aber alsdann erregen sie gerechten Verdacht wider sich und kà ¶nnen auf unverstellte Achtung nicht Einspruch machen, die die Vernunft nur demjenigen bewillt, was ihre freie und à ¶ffentliche Prà ¼fung hat halten mà ¼ssen.â€Å" (Hermes, S. 12). Diese Worte Kants fallen in eine Zeit in der die evangelisch-lutherische Kirche und der absolutistische Staat durch das Landeskirchentum ein enges Bà ¼ndnis geschlossen hatten und so nur schwer angreifbar waren. Das musste auch Gotthold Ephraim Lessing feststellen. Er wurde am 22.1. 1729 im Kamenz geboren und wuchs in der christlichen Tradition des và ¤terlichen evangelisch- lutherischen Pfarrhauses und der Fà ¼rstenschule St. Afra in Meißen auf. Obwohl er das vom Vater gewà ¼nschte Theologiestudium schon nach einem Jahr abbr ach, durchziehen theologische Fragen doch große Teile seines Werkes, was besonders im letzen Jahrzehnt seines Lebens sichtbar wurde: Er fà ¼hrte nicht nur erbitterte theologische Diskussionen, er verà ¶ffentlichte auch „Nathan den Weisenâ€Å", „Die Freimaurerâ€Å" und die Erziehung des Menschengeschlechtsâ€Å". Auf eben erwà ¤hnte theologische Diskussion, auch Fragmentenstreit gennant, bei der Lessing die Macht der anfangs genannten theologisch-staatlichen Allianz zu spà ¼ren bekommt, und auf den darauffolgenden „Nathanâ€Å" mà ¶chte ich in dieser Arbeit eingehen. Da mein Augenmerk dabei speziell auf dem Thema „Entstehungsgeschichte des Nathanâ€Å" liegt, werde ich allgemein beleuchten, was Lessing zum Nathan inspiriert hat, und das war eben nicht nur der Fragmentenstreit, sondern auch andere literarische, historische und biographische Quellen. Nathan als 12 Anti-Goetze 1767- 69 arbeitet Lessing am hamburgischen Nationaltheater als Dramaturg. Zu dieser Zeit ist Johann Albert Hinrich nicht nur sein Arzt, er darf auch seine Bibliothek benà ¼tzen, außerdem ist er mit Hinrichs Schwester Elise Reimarus gut befreundet. Durch diese beiden Geschwister gelangt Lessing an die „Apologie oder Schutzschrift fà ¼r die vernà ¼nftigen Verehrer Gottesâ€Å", die deren Vater Herman Samuel Reimarus geschrieben hat. Reimarus ist ein angesehener hamburger Bà ¼rger, der eine Professur fà ¼r hebrà ¤isch und orientalisch am Akademischen Gymnasium bekleidet. In seiner Apologie à ¼bte der Deist Reimarus eine radikale Bibel-und Dogmenkritik, er ging dabei soweit die Offenbarungslehren zu bezweifeln. Seiner Meinung nach enthalte die reine Lehre Christi „eine vernà ¼nftige praktische Religionâ€Å". Nur durch die Apostel, die Wundergeschichten in ihre Berichte eingefà ¼hrt hà ¤tten, sei diese Lehre zu dem gemacht worden was sie heute ist, nà ¤mlich e ine Religion die sich mit der Vernunft nicht vereinbaren là ¤sst. Z.B. behauptet er anhand von Widersprà ¼chen in der Auferstehungsgeschichte schlussfolgern zu dà ¼rfen, dass die Jesu Jà ¼nger die Leiche des gekreuzigten Jesu selbst haben verschwinden lassen, um durch die Osterpredigt Anhà ¤nger zu gewinnen und sich somit selbst zu Aposteln aufwerten zu kà ¶nnen.

Million Youth March :: essays research papers

Authorities on riot control said Sunday that the Police Department appeared to have moved too swiftly to end a rally of black youths in Harlem on Saturday, and seemed to have forgotten some of the lessons learned from disturbances over the last 30 years. Though one expert defended the police action as a way to prevent matters from getting out of hand, others said the haste in shutting down the rally, known as the Million Youth March, was a sharp break from the past practice of the department, which is known for its smooth handling of massive demonstrations. As Saturday's ralliers began to disband, a police helicopter began making passes over the crowd and officers in riot helmets stormed the stage from behind. Soon bottles, barricades and trash baskets were flying, leaving one person in the crowd and about 15 officers injured. "From the beginning, it seemed clear the mayor and police wanted to make a point," said David Bayley, dean of the School of Criminal Justice at the State University of New York at Albany. "This looks more like politics than tactics." Anthony Bouza, who was the department's commander in Harlem in the early 1970s, said he was shocked by the swift police surge and believes that the police "owe the black community an apology." "You're dealing with people -- not terrorists," said Bouza, who is retired and lives on Cape Cod, Mass. "This confirms the black community's sense that the police are an army of occupation in the ghetto. It's nuts." Bouza recalled that as a police intelligence officer, he spent nearly every Saturday afternoon from 1957 to 1965 listening to Malcolm X and other black nationalists speak on 125th Street. "The one thing that we learned from all the riots of the 1960s was the need to negotiate, to mediate, to be patient," he said. But Mayor Rudolph Giuliani said the police had acted commendably at what "promised to be a much worse event, a really violent event." He said the rally's chief organizer, Khallid Abdul Muhammad, deliberately began his speech just before the rally's court-ordered ending at 4 p.m. "He wanted to create a disturbance," the mayor said. "The police kept that to a minimum, and they did something for which we should be very proud of them." The mayor had repeatedly vowed that at 4, the police would begin treating the gathering as an illegal demonstration.

Elementary, Middle and Highschool Boy-Girl Relationship Essay

Is it too soon to talk about boy/girl relationships in elementary school? Of course it is, you say! Well, you may not want to hear about it, or you may choose denial over reality, but the fact remains that children are playing out the cultural role that they are being taught as early as 2nd grade. Therefore, the relationship between boys and girls at every school (Christian and non- Christian) is a topic that needs to be discussed from a Biblical standpoint. Recently I have observed an increase in the level of interaction between some of the boys and girls at the elementary school level with the boyfriend/girlfriend relationship in mind. There have been some phone calls made and notes passed, and yet nothing really serious has happened. Even so, the fallout from this kind of interest and behavior has been clearly seen, as some of the kids are rejecting others, breaking off friendships, and making â€Å"who likes whom† a focus of attention. The pattern becomes more sophisticated as it continues in the middle school years and is in full bloom by the time the children hit high school. I would like to attempt to persuade you that the elementary level of â€Å"who likes whom,† and the middle school level of â€Å"who is going out with whom,† are not simply innocent and cute stages of life through which everyone must go. As informed Christians professing to glorify the Lord in all things, we need to see if any of this behavior brings glory to God and evaluate the effects of it on our kids. A brief look at the teen dating model and its consequences will show that it is the world’s model, not Christ’s, that we are so accustomed to. Dating is more for a boy and a girl than just spending time together. It’s a lifestyle that involves attitudes and values. It’s a heart thing! Matthew 22:37 says, â€Å"And He said to him, ‘You shall love the Lord your God with all your heart, and wit h all your soul, and with all your mind.’† The first love for our kids is to be Jesus. Our Creator’s plan for our lives is really what we should be directing our kids to focus on; the chief end of man is to glorify God by enjoying Him forever! Romantic male-female relationships are designed by God to be special and singular. The world’s model of dating is one in which you try out many opportunities until you find the one that makes you happy. This type of dating results in a pattern of many broken hearts and bad memories – some of which are detrimental to the intimacy intended for marriage later in life. Interestingly, even the non Christian world is beginning to realize that frequent dating is not healthy. The following are excerpts from an article in the September 8, 2005 Wall Street Journal1 that cites two studies not written from a Christian worldview but nonetheless conclude: * Teens who date a lot don’t have a higher likelihood of developing healthy adult relationships. Instead, their romances in their 20s are likely to be more troubled. * Teens who dated only one or a few people, and formed relationships of more than a few weeks, emerged in their 20s with closer and more-trusting romantic ties than those who had more numerous and fleeting dates. * Unmarried teen girls who settled down with just one partner at 16 or 17- and were still unmarried at 21- are more likely to be eventually married by ages 22-25. Many, including Christians and non Christians, think that dating is just part of the teenage experience. However, putting adolescent boys and girls together leads not only to the emotional experiences that often tear at our children’s hearts but also to sexual experimentation. Think back to your teen years: were you told by a boyfriend or girlfriend in your teen years that he/she loved you? Did he/she eventually marry you? Where did that relationship lead? God wants us to act and think differently. These are matters of the heart. Philippians 1:9-10 says, â€Å"And it is my prayer that your love may abound more and more, with knowledge and all discernment, so that you may approve what is excellent, and may be pure and blameless for the day of Christ.† The goal for most kids in boy/girl relationships is that they are primarily interested in what they are going to get out of the relationship. Sometimes popularity, comfort or pleasure is what a teen gains emotionally or physically. That’s not the kind of love that God would have us live out. That’s choosing what feels good for self rather than what is good for others and pleases God. Parents must be honest and Biblically discerning about the real motivation that lies behind the thoughts and actions of our children. Do love and sincerity motivate the boys in these relationships? Matthew 22:39 says, â€Å"And a second is like it, you shall love your neighbor as yourself.† There is a great book on the subject entitled I Kissed Dating Goodbye, written by Joshua Harris. I have little space here, so I will make a few points and urge you to buy the book. The book is about waiting and preparation, and it debunks and rejects the typical idea of dating and applies a Biblical grid to it. You don’t have to agree with all of his points, but it would behoove you to take a good look at them. Josh Harris says, â€Å"Let’s not do what feels good, but instead do what is good.† He encourages us to look at all of the damage caused by typical worldly dating in the lives of teens and to replace that energy and time with a time of focused preparation for all of life, including preparing for the special relationship of marriage. The book challenges our teens to realize they have no business taking another person’s heart if they are not ready to make a lifelong commitment to that person. He says that if you really love someone, you’ll be interested in that special person’s long-term needs rather than your short-term desires. He exhorts the teen to look at the big picture: serving others and glorifying God. That way, the person is positioned to receive God’s best for them. God has something better for a teen than futile worldly dating! I have two lists for you from the Josh Harris book that are without the further explanation that is needed, but due to lack of space, you’ll just have to get the book to learn more. The seven habits of highly defective dating are: 1. Dating leads to intimacy, but not necessarily commitment. 2. Dating tends to skip the â€Å"friendship stage† of the relationship. 3. Dating often mistakes a physical relationship for love. 4. Dating often isolates a couple from other vital relationships. 5. Dating, in many cases, distracts young adults from their primary responsibility of preparing for the future. 6. Dating can cause discontentment with God’s gift of singleness. 7. Dating creates an artificial environment for evaluating another person’s character. If you are like me, you read those and said amen, I’ve done that before and amen, I see that over and over again. Now here is the refreshing Christian view – five important new attitudes: 1. Every relationship is an opportunity to model Christ’s love. 2. My unmarried years are a gift from God. 3. Intimacy is the reward of commitment; I don’t need to pursue a romantic relationship before I am ready for marriage. 4. I cannot â€Å"own† someone outside of marriage. 5. I will avoid situations that could compromise the purity of my body or mind. Some of you won’t agree. Some of you agree but are saying, â€Å"My child would never go for this.† You are absolutely right. If they have been trained by the world to think like a worldling, they will not want to kiss dating goodbye. But, you are the parent, so†¦.. be the parent! I can’t tell you how often parents tell me what their child will or will not do, so that’s what they (the parents) do. We parents have to take a stand for the Lord and teach the tough things that need to be taught! God will honor that. Some of you are happy that you don’t have teens yet, so you think you don’t have to be concerned. Wrong!!!!!! The reason that we are struggling with our teens and worl dly dating and relationship views isbecause of what they have been taught since Kindergarten. How foolish is it of us parents to allow our child to be taught worldly thinking about male/female relationships and then go to God when our child is 16 years old to beg that He will help our child behave like a Christian when he/she is alone! God will not be mocked! Boys must be taught that they are not to get physical with the girls and that, instead, girls are to be honored and respected. Little things such as holding open a door or helping carry something for a girl are proper and good. The children need to be taught that having an opposite sex relationship is something that is for later in life as you get ready for marriage – something that is also extraordinarily special to people and to God. Boys and girls calling each other on the phone (especially in elementary school) is inappropriate in most cases. We need to teach that people are not possessions that you can trade. Instead, we need to teach them to show real love to one another by helping one another to succeed where they are in life (a student) and to honor God. What are our kids being taught through what they see and hear daily? What are they watching on TV? How about the movies? You and I both know that women are often portrayed as sex objects and trophies. What about at home? Dads, do you treat your wife as the queen of the household? Do your kids see you treating her with great care and affection? Do you realize that everything they see is teaching them how to treat their wives one day? Every year of our lives we are learning and recording permanent records in our minds. I played the worldly relationship and dating game when I was young and things may seem to have worked out OK. My wife and I have been married for 27 years and have a great marriage – but there is more to the story than what you see. Frankly, I am ashamed of many things that I have recorded in my memory regarding male/female relationships from many years ago before I was married. I have prayed that God would remove some of those memories, and He has been gracious, but some remain. In God’s purposes, He often allows us to experience and remember things so we can learn from them and pass the lessons on to others. If you went through the same pattern of worldly dating when you were young, you don’t have to pass it on. You can start afresh with your children. By God’s grace, you have the power to go against the tide of our culture and raise up children who are truly happy and bring glory to God. We have great promises from God that He will be faithful if we will trust and obey Him. I hope that this article has given you some food for thought. Better yet, I hope that you have been convinced that boy/girl relationships in the third, fourth, or fifth grade are yet another battleground for the spiritual struggle for our kids’ hearts. In life, the devil is not kept out of your child’s life by locking a door. We must get after him with all we’ve got and then root out the unbiblical thinking in our kids. 1Shellenbarger, Sue (2005) The Case for Going Steady: Studies Say Teen Dating Habits Affect Marriage Skills. Wall Street Journal, 9/8/2005.

Reviving and Regulating Religion in China Essay

In line with Mao Zedong’s Great Cultural Revolution, religion was banned and atheism was declared to be the official religion of the Chinese Communist Party (CCP). The socialist transformation of China required the elimination of the so-called Four Olds – Old Habits, Old Ideas, Old Culture, and Old Customs (Overmyer, 2000). At the height of this campaign, religious activities were banned and structures of worship such as churches, mosques, temples, and monasteries were destroyed and looted. After Mao’s death in 1976, China revised its position on religion in consonance with the â€Å"Reform and Opening† policy implemented by Deng Xiaoping in 1978, which led toward a period of vitality and cultural openness. The official position of the Chinese nation was embodied in Document 19, a directive which led to the reestablishment of religions and religious affairs in China. While Document 19 guaranteed freedom of religion as means of uniting its people, it still empowered the state to control and regulate worship to ensure its stability and survival. Renewed definition of religion Document 19 critically analyzed the impact of its restrictive religious policy and recognized that religion was a crucial historical phenomenon in â€Å"the development of human society† (MacInnis, 1989, p. 10). The directive produced a comprehensive analysis of the role of religion in China, outlining the errors of the CCP in dealing with the religious question, most notably the â€Å"leftist† excesses during the Great Cultural Revolution which made China subject to severe international criticism. China’s religious policy after liberation â€Å"forcibly forbade normal religious activities by the mass of religious believers,† â€Å"misinterpreted the customs of religions,† and â€Å"used violent measures against religions forcing religious movements underground† (MacInnis, 1989, p. 13). Eventually, according to the directive, the coercive policy toward the religious question went contrary to Marxism-Leninism and Mao Zedong Thought and ended with the destruction not only places of worship but historical sites such as Daoist and Buddhist temples. Document 19 also aimed to rectify the theoretical errors that came with the previous religious policy. It concluded that eliminating freedom of worship violated one of the Party’s principle tasks: uniting the people. According to the directive, there were around 59,000 â€Å"religious professionals† in China; 27,000 Buddhist monks and nuns; 2,600 Daoist priests and nuns; 20,000 Muslim imams; 3,400 were Catholic priests; and 5,900 were from Protestant clergy† (MacInnis, 1989, p. 15). The Document stressed that the previous view of estranging believers was unrealistic because considering that the lives of the Chinese people after liberation and during the Socialist reconstruction only improved gradually, it was a mistake to fast-track the Cultural Revolution. Moreover, considering that class struggle still exists in China despite liberation, â€Å"the long-term influence of religion among a part of the people in a Socialist society cannot be avoided† (MacInnis, 1989, p. 15). Instead of forcing the people to abandon their religious beliefs, the State must recognize that religions, like the state, will wither away once the objective requirements for a Socialist and Communist state will have been met. Because the previous policy divided believers and non-believers, it also denied equality of basic political and economic rights of the masses, hence, forgetting â€Å"that the Party’s basic task is to unite all the people†¦ in order that all may strive to construct a modern, powerful Socialist state† (MacInnis, 1989, p. 12). It predicted that the more estranged the Party becomes from the mass of believers, the more this will incite hatred and fanaticism that will possibly crush the Socialist goals of the Chinese revolution. Moreover, Document 19 clarified the revised perspective of the State on freedom of religion by saying that religion should not be considered an obstruction to the Socialist enterprise. Instead, guaranteeing freedom of religion to citizens â€Å"is a means of strengthening the Party’s efforts to disseminate scientific education as well as to strengthen its propaganda against superstition† (MacInnis, 1989, p. 16). The Document recognized that Socialism’s goal of replacing ignorance and subjectivity with scientific thinking would be carried out if its citizens could be given the freedom of worship. By granting religious freedom, Document 19 stressed that the new religious policy of post-Maoist China was that religion was now â€Å"a private matter, one of individual free choice for citizens† (MacInnis, 1989, p. 16). Normalization of religious practice Document 19 recommended that leaders of â€Å"patriotic religious organizations† be reinstated, their seized property returned, and religious structures and establishments be reopened. Despite emphasizing the concepts of religion being a private right, Document 19 also stressed the need for regulation and normalization of religious practice to ensure the stability of the nation and the preservation of the gains of the revolution against religious specialists in direct collusion from imperialistic aggressors. With Lenin as its guide, Document 19 stressed the caution that must be attached when planning to open religious practice in China, â€Å"Be especially alert,† â€Å"Be very strict,† â€Å"Think things through thoroughly† (MacInnis, 1989, p. 12). Document 19 expressed its support for religions that are considered â€Å"patriotic and law-abiding† and demands the suppression of minority religions that are in direct contact with foreign imperialist counter-revolutionaries. Worship in official religious establishments such as temples and churches are preferred over worship taking place in residences. Although the latter was permitted, Document 19 says it was worrisome: â€Å"As for Protestants gathering in homes for worship services [sic], in principle this should not be allowed, yet this prohibition should not be too rigidly enforced† (MacInnis, 1989, p. 18). Document 19 also established a strategy that aims to promote religion that is patriotic and loyal to the cause of the Chinese nation. It identified the eight â€Å"patriotic religious organizations tasked with implementing the new religious policies of the CCP as: â€Å"Chinese Buddhist Association, Chinese Catholic Patriotic Association, Chinese Daoist Association, Chinese Islamic Association, Chinese Protestant Three-Self Patriotic Movement, Chinese Catholic Bishops’ Conference, Chinese Catholic Religious Affairs Committee, China Christian Council, The Chinese Buddhist and the Daoist Associations† (MacInnis, 1989, p. 18). The Document recognized that if Socialism must coexist with religion, there is a need to reorient religion so that it is compatible with the goals of the Socialist enterprise. The group of eight religious organizations were tasked establish seminaries that will provide training to create a â€Å"new generation of clergy,† a generation who will politically, â€Å"fervently love their homeland and support the Party’s leadership and the Socialist system and who possessed sufficient religious knowledge† (MacInnis, 1989, p. 20). Document 19 granted freedom of worship to citizens but excluded Party members from the practice of religion. Because Communism was considered incompatible of theism, Party members who chose to exercise their freedom of worship would be banned from the Party. The directive also marked out religious practices that were considered illegal such as witchcraft, wizardry, secret societies, magicians, fortune-tellers, and membership in any of these organizations is punishable by law (MacInnis, 1989). Conclusion Document 19 provided for a new atmosphere in China by introducing reformist policies that initiated a revival, albeit regulated, of religious practice. Temples and churches were returned as well as imprisoned religious leaders were released. Freedom of worship became a private right but under normalization guidelines from the State. Religious organizations considered counter-revolutionary were still banned in order to secure the stability of the nation and its Socialist enterprise. Reference MacInnis, D. E. (1989). Religion in China Today. New York: Orbis Books. Overmyer, D. L. (2003). Religion in China today. Cambridge, MA: Cambridge Univ Press.

Postponement

Postponement Strategy Materials Management End Term Project (Term –IV) Date: 15th September 2009 Submitted To: Submitted By: Prof. Vivek Kumar Namrata Agarwal(81031) Prof. Kaushik Paul Neha Gupta(81034) Contents Chapter 14 Introduction4 1. 1 What is Postponement? 4 1. 2 A specific example5 1. 3 Postponement in operation7 Chapter 29 Literature Review9 Chapter 314 When is Postponement Appropriate? 14 3. 1 The Postponement/Speculation (P/S) Matrix14 3. 2 Costs & Benefits of Postponement15 3. 2. 1 More variety15 3. 2. 2 Inventory reduction18 3. 2. 3 Better forecast accuracy19 . 2. 4 Inventory cost reduction20 3. 2. 5 Logistics cost reduction22 3. 2. 6 Improved customer service levels22 3. 2. 7 Increased product development cost23 3. 2. 8 Increased manufacturing cost23 Chapter 424 Case Studies24 4. 1 Automobile Manufacturing: GM24 4. 2 Aircraft Manufacturing: Embraer26 4. 3 Clinical Equipments: Dade Behring29 4. 4 Sports Goods Manufacturing: Reebok32 4. 5 Xilinx34 Chapter 536 Concl usion36 Chapter 638 Future of postponement38 6. 1 Services and postponement38 References40 Chapter 1 Introduction Over the past 2 decades, logistics activities have gained increasing strategic importance for most companies. Fixed costs of production have increased, consumer demands have become more complex and are harder to predict, both in time and place. Technology is rapidly changing and product life cycles have shortened while product range has increased. Now more than ever, companies are faced with the challenge of producing an increasingly large variety of products in a responsive manner while keeping materials and inventory to a minimum. These issues represent significant challenges for companies producing and selling in a variety of international markets. Not only does demand vary from country to country, but products need to be altered for different markets in consideration of differences in language, culture and local standards. Increasingly, companies are using a strategy known as postponement or mass customization to improve customer service and minimize the risks associated with making different products in different countries. This paper presents a framework for understanding postponement and how it can be implemented. Also, with the help of successful case studies potential savings as well challenges in implementation will be highlighted. . 1 What is Postponement? The term postponement refers to delayed decision-making about a product. It is beneficial to delay commitment to product-specific characteristics as late as possible in order to avoid a mismatch between orders and inventory on hand. The length of delay is specific to a product but the common strategic motivation is to gain better information about customer demand by w aiting to customize a product for a particular market or customer. At the point of postponement a standardized module or platform starts to acquire customer or market specific characteristics. Figure 1-1 shows the spectrum of opportunities for postponement that extends from procurement to distribution. The point of postponement can occur as early as the design phase and as late as packaging and distribution. Postponement at the manufacturing stage has arguably the most potential for cost savings in inventory due to risk pooling. Other points of differentiation can occur in the assembly, labeling, packaging, or distribution phases. Some postponement can even occur after the point of sale in the form of service offerings. [pic] Figure 1-1: Possible points of differentiation in the supply chain Postponement enables forecasters to make better predictions about end product demand over time since the standard module is built-to-forecast and the finished product is built to a better forecast or even built-to-order. Lee and Whang [20] observe that shorter the time horizon over which predictions are made, the more accurate the forecast. The benefits are better end product forecasts and the ability to respond quickly to demand signals by holding unfinished goods in inventory awaiting final assembly or customization. Postponement also creates opportunities to lower inventory costs due to risk pooling because goods are kept in unfinished or component form and can be used to assemble more than one type of finished goods. The monetary value of an unfinished good is less because it is not committed to becoming a finished product and lacks the added value gained in final assembly. 1. 2 A specific example Consider a common case of postponement involving a fast food restaurant. Burger King started a trend with the â€Å"have it your way† marketing jingle as a way of advertising the value of getting a customized sandwich – fast! This strategy ensured the customer that each order would be made individually at the time of purchase – not taken from a batch of pre-made products. In a restaurant, ingredients are ordered in aggregate because it is not known what the final customer orders will be. Ingredients that are common to all sandwiches, like buns and lettuce, are ordered based on a total forecast of sales for each type of sandwich. Having a bun and lettuce ready and waiting for final assembly is the â€Å"platform† for the sandwich. The rest of the ingredients, like cheese, meat, and pickles, are components that are specific to each end product. If more of one type of sandwich is ordered or less of another, the total number of buns is not affected by this deviation in demand, however, the amount of cheese would be. It is much less costly to throw out a piece of cheese and use the platform for another order than to throw out an entire sandwich. At Burger King, inventory is managed at the aggregate level. There are four choices of meat and three different types of bun. In addition to buns and meat, there is the choice of cheese, bacon, lettuce, tomato, pickles and onion. In total Burger King can produce 768 different sandwiches as show in Table 1. 1. They know that it is costly to try and predict individual customer’s preferences so they aggregate orders into common platforms which consist of a bun, patty (chicken, beef, fish, or veggie) and lettuce, reducing the options from 768 to 128. Once common components are paired together in a platform, the number of options reduces dramatically because variety is determined by multiplying the number of options together. Once the platform is specified by a customer the rest of the sandwich is made-to-order. Component |Number of Options | |Patty |4 | |Buns |3 | |Cheese |2 | |Bacon |2 | |Lettuce |2 | |Tomato |2 | |Onion |2 | |Pickle |2 | |Total Combinations |768 | Table 1. 1: Sandwich options at Burger King This example illustrates how postponement through platform design and stocking individual components instead of finished goods is able to mitigate the risk associated with producing a wide variety of products. This concept can be applied to more than just food. Examples of products which can benefit from postponement include consumer appliances, automobiles, apparel, and even airplanes. These products have one or more of the following characteristics: high degree of forecast uncertainty, modularity, and high inventory carrying costs. 1. 3 Postponement in operation Operational postponement can be applied in one of two ways – manufacturing and assembly postponement and logistical postponement. Manufacturing and assembly postponement involves the engineering of a product as a module or platform which can take on several different features thereby increasing the variety of end products. The point of postponement can occur as early as the design phase. The intermediate product is stored in inventory and awaits customization. The value added through assembly or manufacturing may be performed at a finishing facility or at a warehouse just before shipping. Manufacturing and assembly postponement involve decisions made while the product is in production. Engineers seek to design a product as a module or platform which can accept different attachments or features in order to transform the appearance and or function to increase product variety. This concept was referred to as a â€Å"vanilla box† by Swaminathan and Tayur [42] because the generic platform is one without any customized value and is therefore the common denominator among a family of different products. Logistical postponement takes into account all other types of postponement involving logistical decisions like packaging, labeling, and distribution. Packaging and labeling postponement traditionally applies to small consumer goods products like razors, batteries, compact disks, film, and snack foods. Large retailers like Wal-Mart and Target require different configurations of packages to accommodate their customer demand and shelf space capacity and to differentiate commodity products. Gillette is well known for their packaging postponement operations. In 1996, Gillette decided to outsource the packaging of their health and beauty items to Sonoco. Bulk quantities of products are sent to Sonoco to await final packaging. Once orders are received appropriate packaging configurations are assembled and shipped to retailers. Manufacturers spend a significant amount of capital and labor trying to satisfy the variability in demand for different configurations for their retailers. However, companies like Gillette, that focus on their core competency, innovating and manufacturing razors and razor blades, push the risk onto their packaging supplier. Sonoco assumes the risk of forecasting for the different retailers which allows Gillette to produce to an aggregate forecast. The benefits for Gillette included a reduction in order fulfillment time from six weeks to one, a 15 percent decrease in packaging inventory, a 10 percent improvement in inventory accuracy, and a 15 percent reduction in packaging costs. Not only does this save Gillette from mismatching demand and configurations, it allows them to focus on engineering, design, and manufacturing of new products instead of packaging. Gillette avoided plant expansion, has a focused factory workforce and is winning favor with retailers by being so responsive. Another example of logistical postponement is the postponement of decisions made about the product during its distribution lead time (from finished product to customer delivery). Whirlpool, a popular manufacturer of household appliances, provides a good example. Customers of Whirlpool include retailers like Sears and Home Depot. Holding inventory of large appliances such as refrigerators and washing machines at local stores is costly because of the high product value and the space taken up in a back storage room. For this reason Whirlpool will send finished goods to a central distribution center and ship directly to the home once a customer order is placed. This method saves the retailer in inventory cost and eliminates additional transportation cost by bypassing the retailer. In addition, it reduces the risk that is inherent in sending a dedicated number of products to individual stores and having to transship orders between retailers. Chapter 2 Literature Review Sources date the idea of postponement as far back as the 1920s and the first use of postponement as a manufacturing strategy as early as the 1950s. Early mention of postponement suggested that costs due to risk and uncertainty were a function of variety and that an efficient means of producing a product is to â€Å"postpone changes in form and identity to the latest point in the marketing flow [and] postpone changes in inventory location to the latest point in time†. In 1965, Louis Bucklin recognized that little had been done in the area of postponement despite its tremendous potential for cost savings. He defined total cost as the sum of inventory holding cost and delivery cost, both of which are a function of delivery time. He argued that â€Å"a speculative inventory will appear at each point in a distribution channel whenever its costs are less than the net savings to both buyer and seller from postponement†. In other words, postponement is not cost effective when there is sufficient information about demand to produce finished goods in mass and store them in inventory. For some products it makes sense to postpone the finishing process by introducing a finishing cost and increasing the delivery time because the product is not readily available from stock. Zinn and Bowersox [50] classified postponement into five distinct types; labeling, packaging, assembly, manufacturing, and time. Labeling postponement assumes that products are standardized until they receive a label distinguishing them by brand. Packaging postponement is best suited for products in which variation is determined by package size. Paint, chemicals, medicine, razors, and many food items sold in bulk are good candidates for packaging postponement. Assembly postponement is applied to products in which variety is based on cosmetic features like cars, iPods, t-shirts, and printers. Hewlett-Packard (HP) provides an excellent example of assembly postponement. Printers designed for different global markets are inherently the same product except for country specific power supply modules, power cord plugs, and instruction manuals. HP makes two types of printers in Vancouver: a US version and a generic version that is customized once it reaches a distribution center in Europe, Asia, or the Pacific based on country specific orders. One benefit is decreased transportation cost because printers are shipped in bulk and are considered †vanilla† until they receive the value-added accessories like language manual and power supply. Manufacturing postponement occurs when parts are shipped to the finishing center from more than one supplier. It has the greatest potential for cost savings in inventory because the value of the product increases through the addition of each successive component. Manufacturing postponement usually results in higher production costs. The increase is due to the capital cost of switching machinery between different types of variety and shipping them to different finishing facilities. Time postponement occurs when finished products are shipped to centralized warehouses closer to the customer than the manufacturing location. The motivation is to increase customer service levels by decreasing customer lead time and to respond quickly to orders by placing inventories closer to the customer without committing to an individual order. |Postponement Type | Potentially Interested Firms | |Labeling |Several brand names | | |High unit value products | | High product sales fluctuations | |Packaging |Variability in package size | | |High unit value products | | |High product sales fluctuations | |Assembly |Selling products with several versions | | |High volume incurred by packaging | | |High unit value products | | |High product sales fluctuations | |Manufacturing |High proportion of ubiquitous material | | |High unit value products | | |High product sales fluctuations | |Time |High unit value products | | |Large number of distribution warehouses | Table 2. 1: Poten tial Utilization of Postponements The final outcome of their research is a framework which serves to assist managers in determining what type of postponement is best for a given product or supply chain structure. Table 2. 1 shows a list of the postponement types and the firms which would benefit from implementing each type of postponement. Swaminathan and Lee [42] go further and identify the factors which influence the costs and benefits of postponement as market factors, process factors, and product factors. Market factors refer to characteristics of demand and uncertainty. Process factors refer to characteristics of operating policy within the firm as well as the external supply chain, such as managerial support and the location of and relationship with suppliers. Product factors refer to the design and characteristics of an individual product such as integral versus modular and inventory carrying cost. They also highlight enablers of postponement such as process standardization, process resequencing (redesigning the assembly process to move value-added processes closer to the customer), and component standardization. Redesigning products with these characteristics makes postponement possible and reduces the risk to the manufacturer by eliminating redundant processes and designing products to be modular and component interfaces to have standard ports for easy assembly. Alvin Lehnerd and Marc Meyer [21] offer a detailed look at the benefit of engineering products to be platforms for a family of different products. The authors define two terms which are the basis for postponement. †¢ Product platform – a set of common components, modules, or parts from which a stream of derivative products can be efficiently created or launched †¢ Product family – a set of products that share common technology and address a related set of market applications These are both concepts that Black and Decker (BD) considered when they started to redesign their line of power tools. In the 1970s BD replaced customized parts with standardized components, interfaces, and connections in order to pool the part inventory and save on component inventory costs. Components included common screws, gears, and the motors which powered 122 different power tools. At a cost of $17 million over three years, BD was able to fully integrate its supply chain, reduce scrap rate from six percent to one percent, reduce failure rate from 11 percent to less than five percent, and reduce the selling price by half while still maintaining a 50 percent margin. BD was also able to reduce the number of suppliers and push its competition out of the market. This is one of the first cases of postponement using product platform design. Product platforms are also common in automotive and aircraft design. Lee, Billington, and Carter [20] discuss Hewlett-Packard’s strategy when it created a single platform for its DeskJet Plus, Deskwriter, Deskwriter Appletalk, and the DeskJet 500 series. A major source of variability for HP was the final shipping destination. HP ships its DeskJet Plus printers to North America, Europe, Asia, and the South Pacific. Each one requires a different power supply module and language manual. Under the â€Å"DC-localization† initiative printers are shipped from the manufacturing center in Vancouver and arrive at a local distribution center (DC) without language manuals or power supply modules. The DC supplies the remaining country specific features and packages the printers for final sale. This allows HP to pool the risk of stocking inventory by destination. Taking the process a step further, HP realized that Vancouver was close enough to the US where it could act as the local DC and hence two different types of printers are produced; US and non-US versions. This example illustrates how postponement is used in multiple ways for a single product. The designers at HP had to create a printer with a generic power supply port which is a form of assembly/production postponement. The local DCs had the job of assembling a final product complete with instruction manual, power supply, and the appropriate packaging material. Robert Stahl and Thomas Wallace [47] propose a framework for implementing postponement by classifying products according to two factors; product complexity – the number of product varieties, and speed – the time from customer order to delivery. This results in four levels of differentiation as shown in Figure 2. 1. [pic] Figure 2. 1: Complexity vs. Speed Matrix [47] Companies in each of the four quadrants have different challenges when adopting a postponement strategy. For example, a company in quadrant B produces a product that has very little variety but takes a long time to produce and deliver to the customer. Wallace and Stahl suggest that a company in this quadrant focus on speed by reducing the lead time from suppliers and expedite the delivery to the customer. They can accomplish this by implementing lean manufacturing initiatives, improving the work flow, and reexamining the location of their suppliers in terms of distance to the customer. This dilemma illustrates the trade-off between cost and service level. One way to take advantage of distant suppliers and still achieve fast delivery is to decouple the production process and hold inventory of intermediate product locally. Chapter 3 When is Postponement Appropriate? Postponement has the potential to lower the total delivered cost of a product. However, postponement does come with its own costs to implement and maintain. The benefits outweigh the costs when postponement is implemented correctly for the right type of product. For products with certain characteristics postponement allows companies to offer more variety, improve forecast accuracy, reduce inventories, and improve customer service levels. With these benefits come the costs of implementation and manufacturing. 3. 1 The Postponement/Speculation (P/S) Matrix Pagh and Cooper (1998) developed a simple but very powerful conceptual model to show the range of postponement strategies that could be adopted by companies. Four generic strategies were identified: full speculation, logistics postponement, manufacturing postponement and full postponement. These were presented in the form of a matrix as shown in Figure 3. | |Logistics | | | |Speculation |Postponement | |Manufacturing |Speculation |The full speculation strategy |The logistics postponement strategy | | | |low production and distribution costs |low production costs | | | |high customer service and high inventory |low/medium customer service and inventory | | | |costs |costs | | | | |high dist ribution costs | | |Postponement |The manufacturing postponement strategy |The full postponement strategy | | | |low distribution costs |low inventory costs and customer service | | | |medium to high production costs, |medium/high production costs | | | |inventory costs and customer service|high distribution costs | Figure 3. 1: The P/S Matrix (Source: Pagh & Cooper, 1998) The strategy of full speculation represents a complete reliance on forecasting, where all differentiating manufacturing operations are performed prior to the product being moved to different markets (‘push’ based system). The strategy of full postponement represents the highest level of delay in the supply chain (‘pull’ based system). As shown by Figure 3. 1, the decision about which strategy to use is essentially a tradeoff between different levels of customer service and inventory, production and distribution costs. 3. 2 Costs & Benefits of Postponement The question arises, when is the postponement strategy appropriate and when it is not? Where should a company position itself on the P/S matrix? In order to determine the most appropriate level of postponement that should be practiced, the benefits and the related costs must be weighed accurately. 3. 2. 1 More variety Having variety allows for a closer match between customer preferences and offered products leading to increased sales and (sometimes) increased prices. The build-to-order strategy pioneered by Dell shows how manufacturing a product according to customer specifications is one way to offer a large variety in a cost effective way. Dell offers enough options for their Dimension 4600C desktop to build over 100 million different computers using combinations of the components listed in Table 3. 1. Parts |Options | |Intel Pentium 4 |5 | |Operating Systems |5 | |Productivity Software |6 | |Memory |8 | |Hard Drive |4 | |Floppy/Storage Device |4 | |CD/DVD Drive |6 | |CD/DVD Software |4 | |Storage Devices and Media |2 | |Keyboards |3 | |Mouse |4 | |Monitor |9 | |Total Combinations |100million | Table 3. 1: Component List and Options for Dell 4600C Just like Burger King, Dell does not stock each of the 100 million varieties. Instead, they wait for customers to place an order before they build a machine. They have perfected this strategy so well that they are able to shape demand and produce popular combinations to forecast. Dell can offer discounts on combinations that are popular because of economies of scale and can carefully encourage customers to choose components that are in-stock using discounts. This strategy allows them to offer a quick turnaround and ensures that customers will not have to wait more than a week for a new product. Figure 3-2 shows a system dynamic loop measuring different factors that affect the number of product variety offerings. There are seven loops in the figure. The reinforcing loops (denoted by a positive arrow) show factors which increase the growth of product variety. The balancing loops (denoted by a negative arrow) show factors which inhibit the growth of variety. [pic] Figure 3-2: Systems dynamic loop showing product variety proliferation Loop one is a reinforcing loop that shows how variety grows because of the need to satisfy individual customers’ needs. The more customers see that their needs can be met, the greater their satisfaction in finding a unique product. This can force their expectations to be greater which narrows down markets even further. Loop two is a balancing loop that shows how a company reacts when it has captured most or all of the market, suppressing the need for innovation and excess product variety. Loop three is a reinforcing loop that shows what happens when there are multiple firms competing for market share. As a company’s customer base increases it continues to innovate and offer more variety as a competitive advantage. Loop four is a reinforcing loop that shows the effect of technology on product variety. Loop five is a balancing loop that suggests that customers will become saturated with information and buy the product which offers them the best value given their search costs (time and information processing). As the number of choices keeps growing, negative aspects of having a multitude of options begin to appear†¦ the negatives escalate until we become overloaded† [38]. When too much variety exists, companies must tradeoff between offering variety and holding inventory. Loop six is a balancing loop which shows how high variety is traditionally associated with higher unit costs. When the unit cost increases, the customer’s willingness to pay for that variety goes down unless the extra cost adds value to the customer, which is the goal of customization. Similarly, in loop seven, as production lead time increases, customer service levels drop and customers are less willing to wait for variety without some compensation in terms of added value. Loops six and seven are opportunities where postponement can change the direction of the loops from balancing to reinforcing negating the traditional trade-off that exists between higher costs and variety with poorer levels of service. Postponement allows for more variety through standardization and holding intermediate product inventory and better customer service though relocating final assembly closer to the customer. 3. 2. 2 Inventory reduction Reduction in inventory under a fixed level of service is another benefit of postponement. When companies increase variety they increase the number of SKUs they must maintain which translates into higher inventory costs. Each SKU is subject to different forecasts and therefore require different levels of safety stock. Safety stock buffers against sudden increases in demand. Holding safety stock ensures better customer service but is also expensive because of inventory holding costs. In a study of the effect of product variety on production-inventory systems, Benjaafar and Kim [8] found that inventory levels increased linearly with variety. They also found that cost was most sensitive to demand variability, capacity constraints, and set-up costs (assuming a fixed cost to switch the production line between products). This highlights the risk associated with having too much variety for products, especially those with high demand variability. Companies can mitigate this risk by standardizing parts, holding more work in process (WIP) inventory, and postponing customization. 3. 2. 3 Better forecast accuracy Delaying the final customization of a product until more information is available allows forecasters to make better predictions of finished product demand. In order to delay customization, however, it is necessary to define what features or components make a product unique. Figure 3-3 shows how postponement reduces the variability of end product demand and saves on total inventory cost. [pic] Figure 3-3: Demand accuracy of postponed and non-postponed operations over time Using Figure 3-3, suppose that coffee mugs come in five different colors. The demand for each color is an independent random variable normally distributed with mean ? i and standard deviation ? i where i = 1†¦ 5 for each of the different colors and ? i = ? ij and ? i = ? ij for all i and j. Total demand for mugs is N( i, v i2). The standard deviation for the demand of white mugs, v i2 , is less than the sum of the standard deviations of the individual demand, v i2, which explains why aggregate forecasts are less volatile. Additionally, forecasts generally improve over time therefore, ? i,T > ? i,t where T > t and ? i,t is the standard deviation in demand of mug i at time t. In this example, assume information about demand gained in the period up until time L/2 reduced the standard deviation of demand for each individual mug by half. Also, assume that at time L/2 the finishing time is equal to the customer’s willingness to wait. The producer is then forced to start painting the mugs at time L/2 to meet the customer demand on time. The variability of demand for mug color is more accurate at this point than it was at the start of the manufacturing process. It makes sense, then, to produce i or 5? uncolored mugs at time zero and then paint them at time L/2 assuming there are no additional switching costs incurred in this two-stage model. 3. 2. 4 Inventory cost reduction The amount of variety also affects inventory levels and hence, cost. The appropriate inventory level for a single SKU during a period of time consists of stocking the expected demand plus safety stock. Safety stock acts as a buffer to avoid stock-outs. Holding more safety stock improves customer service levels, but it comes at a cost. There are many formulas and practices for determining safety stock, however, this simple â€Å"fixed safety factor† approach assumes demand is normally distributed and is commonly used to determine the appropriate level of safety stock, ssi , given a certain level of customer service, ssi = k ? i (3. 1) In equation 3. 1 k is the safety stock factor which is based on a given level of service desired by the producer and _i is the standard deviation of the errors of forecasts over a given period of time. The amount of inventory, hi , to have at the beginning of an order cycle for a single SKU is given by hi = ? i + ssi (3. 2) Assuming that all colors of mugs have the same mean, ? , and standard deviation, ? , of forecast errors, total inventory, H, is a function of the number of varieties, n, H = n(? + ss) (3. 3) Without postponement, inventory cost increases exponentially, not linearly, withn. However, as mentioned above, if orders are aggregated and produced in unfinished form, the total overall variation decreases. For example, assume each mug has the same mean forecast, ? i = 50 and standard deviation or forecast error, ? i = 2 for all i. The company wants to maintain a customer service level of 98 percent which equates to a safety factor of k = 2. 05. A comparison of the amount of inventory required to satisfy the variability in demand at the beginning of the production cycle with and without postponement as variety increases is shown in Figure 3-4. [pic] Figure 3-4: FGI under postponed and non-postponed operations Not only is the amount of inventory less under postponement, the cost to hold a single SKU is also lower because the product is unfinished. There is still the cost of stocking components for the finishing process (paint) but it is less expensive to keep the mug in an uncommitted state and hold the paint in component form. 3. 2. 5 Logistics cost reduction The above mentioned case of postponement illustrates delayed customization involving painting the exterior of a pre-produced standardized good, a coffee mug. Many examples of postponement exist where points of differentiation occur as early as the design phase and as late as product labeling and packaging. A modular product design offers more opportunities for outsourcing non-core processes, like packaging and distribution, to third parties. This can happen both onshore and offshore depending on the location and distance of the end customer. In either case, the manufacturer can save money by shipping products in bulk instead of in packaged form which usually adds extra weight and volume. 3. 2. 6 Improved customer service levels Customer service levels are defined in terms of lead time – how long it takes an order to arrive, and item fill rate – how often orders are filled from inventory on hand. Providing customers with orders quickly can be the result of improvements in manufacturing processes or by repositioning inventory closer to the customer. Customer willingness to wait is a key factor when assessing a product for postponement and determining the location of the postponement point within the supply chain. If customers are willing to wait a long time for a product then there is no benefit from expediting orders or sourcing components or processes closer to the customer even if they can be done cheaper overseas. On the other hand, if customers are only willing to wait, for example, one week, then the supply chain must be structured so that the finishing lead time and delivery time is less than or equal to one week. This breakpoint between initial and finishing lead times is called the decoupling point and separates production into two stages. The length of time for the first stage is not visible to the customer and therefore all options for achieving lower manufacturing costs can be exhausted. The second stage of the supply chain (from intermediate product to delivery) must be structured in a way that offers the customer the highest level of service without sacrificing cost. 3. 2. 7 Increased product development cost Another cost of postponement is the cost of design. If a product does not already have a modular design but meets all of the necessary market characteristics then it is worth researching the cost of redesigning the product for postponement. The benefit of a modular design is the flexibility it creates for other products within a family. However, there is a balance between too much modularity and its effect on product variety. The risk of too much modularity is a lack of differentiation between products. In addition, the cost to switch manufacturing operations between varieties is sometimes responsible for reducing economies of scale that could otherwise result. In terms of cost, product redesign can take engineers months translating into increased research and development costs. 3. 2. 8 Increased manufacturing cost There is a considerable amount of financial investment and commitment required to reconstruct the supply chain to support postponement. Manufacturing cost per unit may increase due to a restructuring of the production process into two or more stages. There should be dedicated areas for postponed activities in a warehouse and easy access to loading docks. If all manufacturing is not done in-house (which is more likely than not) implementation may require additional facilities to support final assembly and distribution. This also requires more labor at a higher skill level to complete kitting, final assembly, and packaging as opposed to the lower skilled labor required for loading, storing, and sorting. Chapter 4 Case Studies The following case studies give detailed information about several companies that have adopted postponement in some capacity. It is worth understanding the motivations and risks that they incurred in order to understand how companies can determine whether their product is a candidate for postponement. Each case provides background on the company and product that is postponed, a description of the supply chain before and after postponement was adopted, the decoupling point between intermediate product and finished good, costs and benefits, and discusses how the supply chain is structured to take advantage of offshore manufacturing and local final assembly. 4. 1 Automobile Manufacturing: GM The auto industry is a prime candidate for postponement for many reasons. First, a car is defined as a modular system of components. This creates opportunity for commonality by producing a platform and adding modular subassemblies customized according to the make and model and ultimately the end user of the vehicle. Second, individually customized vehicles have high forecast variability. As this case points out there are far too many varieties to accurately forecast each combination and there is typically disagreement on the forecast within the different divisions of a company. Third, cars depreciate as soon as they are driven off the lot. New models come out each year which new features, technologies and capabilities. Lastly, high inventory holding cost. It is much riskier to hold a finished vehicle on the showroom floor than to have a partly finished good waiting for final customization because of the high forecast variability for end products and high product obsolescence cost. General Motors (GM) offers a unique look into customization during manufacturing and after the point of sale. By 2004, GM produced 68 different models in North America. There were over 200 facilities constituting 52 percent of their revenues. There were over 600 million combinations when all the different component variations and customer specific preferences (color, interior options) were considered. Forecasting was extremely difficult, considering these many combinations. Different divisions within GM used different methods of forecasting which further complicated the problem and led to excess inventory on the field. Searching for a way to create variety and mass customize beyond the idea of platforms, GM looked at software configuration, entertainment, and aesthetic features as a different way to use postponement. From a software standpoint, each of the systems within a vehicle can also be considered a unique central processing unit (CPU) made up of several electronic control units (ECUs). These include safety systems, engine, and transmission controls. In the 1990s there were only one or two ECUs in a vehicle. Now there are as many as 30-35 per vehicle because software is becoming increasingly essential in automobiles for voice recognition, global positioning systems, and entertainment. Before postponement, GM experienced the effects of product variety proliferation and high inventory costs of stocking ECUs for individual models. The ECUs came to GM in finished form with all of the software pre-loaded. Suppliers charged GM a premium for custom software installation which not only raised the price but also created problems with repair and maintenance. GM decided that they would assume the responsibility for software configuration and postpone the installation until the latest possible point in the assembly process. In order to accomplish this, GM had to redesign both the assembly process and the ECU hardware. In the mid-1990s GM achieved the capability to install custom software for individual orders towards the end of the vehicle assembly process. The ECU now comes from suppliers to GM in a generic form. The hardware is a common platform which can receive customized software in just 81 seconds. GM dealers also had to acquire the capability for flash programming for individual cars at the point of sale as well as after-market upgrades. After realizing that software could be postponed, GM looked at other systems that could be delayed until purchase. They recognized the emergence of the accessory market for vehicles as another way to differentiate and increase revenues. Entertainment systems have become far more sophisticated over the years and offer key differential options on a vehicle. Because of the plug-and-play capability, entertainment systems can be uploaded into the vehicle at the dealer. Another key differentiator is the wheel set. Dealers are very involved in putting specialized wheels on a car to make it more desirable. Through the use of the internet, GM introduced an on-line purchasing website. Customers can log on to GMbuypower. com and point and click their way to the car of their dreams. GM offers a 99 percent guarantee that they will deliver the vehicle within one day of the projected delivery day to a dealer close to the customer. By 2004, about 18 percent of the cars in assembly at GM were custom made and 82 percent were made-to-stock for dealers and showrooms. The goal is to move to 60-80 percent custom orders but the shift is happening in different markets at different rates. GM is experiencing the benefits of postponement through delayed software configuration and customization. In a study to estimate the benefits of postponement, GM, along with MIT and Stanford University, developed a cost model which projected inventory cost savings to be 10-15 percent. Other benefits included maintenance cost savings due to the highly communized ECU hardware and having GM software engineers solve repair issues instead of sending parts back to suppliers. GM’s main goal, however, is to create a more flexible supply chain that can handle higher throughput and is more responsive to immediate demand. 4. 2 Aircraft Manufacturing: Embraer The commercial aircraft production at Embraer provides an example of production and assembly postponement in the airline industry. The motivation for postponement was to focus on â€Å"optimizing cash flow† by creating a flexible supply chain that can provide the right airplane to the right airline company. In other words, the goal is to give customers the ability to change their decision regarding customizable features, or to cancel an order completely, by designing the aircraft to accept these changes as late in production as possible. In response to the changing dynamics within the aircraft industry Embraer differentiates its new family of regional jets based on the number of seats. The new family of regional jets, the Embraer 170, 175, 190 and 195, focuses on a high degree of parts commonality as all four jets have exactly the same cockpit and fly-by-wire systems. Embraer decided to implement postponement in order to make its supply chain more flexible and able to respond quickly to changes in demand. This was evident when a customer, US Air, had to cancel an order for six ERJ 170 aircraft because of financial constraints in October 2004. With the majority of the production complete it was too costly to go back and change any of the customized features and reconfigure it for another airline. Embraer developed a strategy for postponing as much of the high value features, like engine type, software, radar devices, and interior specifications as possible. Not only did it save on costs, the flexibility to change order specifications became an attractive alternative to backing out of an order or having to pay for costly reconfigurations. The current supply chain at Embraer is structured to allow for two postponement points throughout the production cycle as illustrated in Figure 4. 1. The first point occurs roughly one year before delivery to the customer where the platform is differentiated based on product family (170 versus 190 family of aircraft). Six to eight months later it will assume the configurations, engine, software and hardware which distinguish it as a 170 versus a 175 or 190 versus a 195 aircraft. After this point the customer specific features such as seating arrangements, galley configurations, and tail art are added. [pic] Figure 4. 1: Lead time break down of value added components and features Embraer still builds-to-order because of the high cost to hold a finished airplane in inventory. The white tail concept (analogous to a â€Å"vanilla box†) allows the production processes to begin and run in parallel with some of the steps that usually take a long time to complete such as certification for safety, avionics, and entertainment systems. Total lead time for production is usually 24-36 months because of the long lead time for suppliers. Production begins 12 months before delivery and the order is considered 90 percent â€Å"frozen† or unchanging. However, some customers change their mind within the final month of production. Embraer is committed to developing the idea of postponement further within the company. Any flexibility that can be gained through delaying the customization makes Embraer jets more attractive to a customer facing the uncertainties of the aircraft industry. Engine, avionics, interior and galley layout are some of the hardest subassemblies to change and also have the highest value. The white tail concept allows Embraer to have flexible production in its new family of 170/190 aircraft. They do hold some inventory of semi-finished aircraft that await orders from larger companies in the corporate jet market because the orders are more predictable. Embraer represents a company that is practicing postponement and is not seeing huge savings in inventory. Instead they redesigned their process to accommodate the addition of components based on value to the customer and degree of customization. Better service levels and customer satisfaction give Embraer a competitive advantage in a very competitive market. 4. 3 Clinical Equipments: Dade Behring Dade Behring (DB) is an industry leader in clinical diagnostic equipment and reagents. Their customers include over 25,000 hospitals and reference laboratories which require instruments that analyze human fluids such as blood and urine. They have global operations in more than 34 countries and currently deliver products in six main areas: Chemistry, Immunochemistry, Hemostasis, Plasma Protein, Microbiology, and Infectious Disease Diagnostics. DB diagnostic instruments are high value with a retail price ranging from $20,000 to over $200,000. Demand forecasting is a challenge due to long buying cycles ranging anywhere from six months to two years. Forecasts are generally compiled from sales representatives’ predictions. Because of the high cost of the products, the decision making process and financial constraints of the customers, it is somewhat difficult to know when products will be ordered. Additionally, instruments were designed/ configured to local country power requirements which exasperated the forecasting impact. As a result, DB was plagued with less than optimum service levels for some instruments and higher than planned inventories for others. All of these conditions were catalysts for a postponement strategy, which became even more important as a result of an industry-wide European directive. The first postponement strategy involved designing flexible power capability into the Dimension Chemistry/Immunochemistry analyzers that Dade Behring designed and produced. Originally Dimension was offered in either a 110 V or 220 V power versions. To optimally manage inventories of these instruments, DB collaborated with an external supplier to replace the power supply module with a universal power supply. During the redesign phase engineers were able to develop the universal module at a lower cost because of advanced technology which was previously unavailable. The cost to produce the universal module was actually less expensive than supplying two different versions. Then, a second postponement strategy was put into place due to the European IVDD initiative. In 1998, the In Vitro Diagnostics Directive (IVDD) was ublished as the third of three European directives which required medical and diagnostic equipment to come packaged with local language manuals and labeling. The regulation gave 17 countries the right to specify the national language that would come available with each instrument for which they contracted. In total 12 different language manual s were eventually required. The instrument manuals are approximately 350 pages in length and therefore it did not make sense to create a single manual with all 12 languages included nor package 12 different manuals with each instrument. DB initiated the switch to language specific packaging in the industry through the postponement of packaging materials at distribution centers and flexible language capability within the operating software. This is a straight forward process accomplished by marrying a language specific accessory box to the instrument during the shipment process. Shortly after achieving successful packaging operations, DB initiated another postponement strategy in their Chemistry product line. This next strategy was to redesign the product so that it could be configured-to-order at the end of the assembly process. There are currently four variations of the Dimension Chemistry/Immunochemistry Analyzer Series. Dimension is offered as RxL Max Basic and RxL Max HM (heterogeneous model), or as an Xpand Plus Basic and Xpand Plus HM. Through a carefully designed manufacturing process, Dade Behring is able to manufacture a specific model as soon as that specific model is shipped to fill a customer order. This strategy involved the redesign of the manufacturing process so that the analyzer could be configured-to-order at the end of the assembly process. This meant that all of the commonalities between the two different variations of each model would be combined into an intermediate product that would be produced to a forecast, stored as intermediate inventory, and configured-to-order once an order was received. The redesign phase took a team of engineers six months to make changes and train workers on the assembly line. The supply chain as shown in Figure 4. 2 became vastly more efficient and service levels increased dramatically. [pic] Figure 4. 2: Dade Behring supply chain Customer service levels improved and inventory was significantly reduced by eliminating the need to store high value finished goods. Inventory across the supply chain was reduced through a 50 percent reduction in â€Å"buffer† or safety stock. Service levels went from oscillating between 70-100 percent to greater than 98 percent. Once DB was able to improve service time to customers they started looking at their distribution centers and found opportunities to improve distribution strategies, given the improved flow of instruments through the manufacturing process. Because the opportunity cost of a lost sale in this industry is very high, distribution centers would store finished goods as a way to mitigate the risk of instrument shipment delays. However, when service levels improved, DB found that they could eliminate 50 percent of their global buffer inventory by eliminating the stocking of instruments in distribution centers in Asia and Canada, and reducing inventory levels in Latin America. Their primary instrument warehouses in the US and Europe service their global instrument distribution needs. The make-to-order and inventory management strategy provides DB with a decisive advantage in the industry. This is a classic example of the benefits of the successful implementation of postponement. Because of this success, DB was able to continue developing postponement in other lines of instruments. Today, more than 85 percent of instrument production at DB involves some form of postponement compared to less than five percent five years ago. By redesigning the Dimension instruments to be easily adaptable for configuration, DB realized that the product could also be easily de-configured back to the intermediate stage to support the secondary market for instruments. 4. 4 Sports Goods Manufacturing: Reebok As a licensed supplier for the NBA and NHL and principle supplier for the NFL, Reebok knows the difficulties that come with satisfying the demand of a very â€Å"fair weather† crowd. When teams do well more team apparel is demanded. The demand for a player specific jersey is inherently more volatile than for a given team. Meeting customer requirements within a short period of time is a major challenge in the sporting goods industry. Sales of t-shirts and jerseys are not too predictable because Reebok does not know which teams will be â€Å"hot† at the beginning of the season. Demand for jerseys averages 30,000 per week or 1. 5 million each year. The different choices of team name, player name, color scheme, and size makes it extremely difficult to predict demand of an individual item during the pre-season. The idea of postponement in this industry is not new. Images of silk-screen companies working overtime minutes after an NCAA basketball championship game, illustrates the idea of postponement. These manufacturers know that it is better to wait until there is certainty about the outcome of a game before producing apparel with the losing team’s name on it. As a result they keep white or blank shirts on hand ready for printing. At this point in the supply chain it would not make sense to put in an order for finished shirts from scratch to an overseas manufacturer (even if it costs less to make the shirt). The long lead time would mean missing the increase in sales generated within two weeks after a big win. This can be anything from an important mid-season upset, a new player entering the roster, players becoming â€Å"hot†, or the end of season championships. Reebok recognized this as an opportunity to restructure the supply chain to cater to both stable items – finished apparel that is produced to a forecast much earlier in the season, and customized apparel. The difference in the lead time for both of these items is significant. Retailers expect lead time to be 3-12 weeks for the stable items and as little as one week for the â€Å"hot† items. Reebok outsource the cutting and sewing of fabric to contract manufacturers in Central America. Some of the jerseys sent to Reebok are finished meaning that there is a customized team and player name already on the garment. Other jerseys, called â€Å"team finished† jerseys are sent with everything but a player’s name. These go straight to a distribution center that Reebok owns and operates in Indianapolis. The blank or team finished jerseys help satisfy two different types of demand. The first is for the hot players or players who sign with a team late in the pre-season and the second is for the players who have a small, but somewhat predictable demand. [pic] Figure 4. 3: Reebok Supply Chain According to Figure 5. the blank jerseys arrive in the US and are ready for screen printing and embroidering. The decision to have a separate facility in the US is a result of the end customer’s unwillingness to wait. Fans expect to find the jersey they are looking for in a store. There is a chance they will be less likely to want one if they have to wait weeks to get it – especially when an NFL team only plays 16 games per season. At a price of $25 for a long-sleeve t-shirt or $250 for an authentic jersey, the cost of lost sales is greater than the cost to ship, unpack, finish and reship a jersey from a local finishing center. Reebok is a classic example of two-stage production with postponement. They are able to take advantage of lower labor costs for the production of blank jerseys and optimize service levels by souring the final assembly in the US. This also creates local jobs in the areas of textile and silk-screen printing. 4. 5 Xilinx Xilinx is a semi-conductor manufacturer with headquarters in San Jose, CA. The semi-conductor industry is very volatile due to the wide variety of products and short product life cycle. Semi-conductors manufacturers are supplied to OEMs in the telecom, small electronics, and aerospace industries. However, they have a supply chain of their own which requires assembling and configuring wafers of silicon into programmable dies which later become integrated circuits. Their position in this multi-echelon supply chain makes forecasting for specific end product demand costly, impractical, and very inaccurate. In addition, semiconductor manufacturing is quickly becoming a commoditized process. Comparative intellectual and technological benefits that leaders in this industry were accustomed to are now becoming less of a competitive advantage. The focus has shifted from intellectual advantage to supply chain efficiency as a means of differentiation. The life cycle for an integrated circuit is anywhere from six months to two years. During that time new technology will make existing products obsolete. Having long manufacturing lead times cripples a company’s ability to quickly respond to these changes as well as changes in customer specific orders. Having a generic product and creating a postponement point separating a die with generic qualities and one with a specific logic configuration allow them to respond quickly and offer flexibility to their customers. Xilinx began with a combination of both process and product postponement. Product postponement was implemented by redesigning the dies to a certain range of parameters for the different characteristics. For example, there are four major sources of variety in an integrated circuit; speed, number of logic gates, package types, and voltage. Customers can specify generic capabilities and can customize the chip to their specific specifications after the fabrication stage. The amount of variety makes postponement very beneficial. Xilinx can manufacture 200 different dies that can proliferate into over 4,000 different end product combinations. That makes the ratio of generic dies to end products roughly 1:20. The manufacturing process is broken up into two stages. Suppose a certain generic die, A, can be configured to take on 20 different configurations, {A1, A2, A3, †¦ , A20). When a customer requests the specifications, they only need to specify the generic die. Once it is pulled from â€Å"A† inventory, it is customized to a certain degree depending on customer order specifications. This specification can take place at Xilinx for high volume orders or it can be delayed even further so that the point of customization occurs at the customer. Approximately 20 percent fall into the high volume category and the remaining 80 percent are left for customization at the customer. The final customization is a matter of programming the software within the chip. By eliminating this process from the front end (manufacturing) process, Xilinx cut manufacturing lead time from three months to three weeks. Manufacturing usually takes place in Taiwan or Japan and then product sits in inventory at Xilinx awaiting testing. Testing facilities are located in Korea, Taiwan, and Japan. While postponement has reduced inventory and helped Xilinx meet customer requirements with more accuracy and on-time deliveries, it is just the beginning. Postponement within the semiconductor industry will extend far beyond customer configuration capabilities. Chapter 5 Conclusion The case studies presented in this paper come from a wide variety of industries. Each company was successful in implementing postponement for similar reasons, but have seen a wide variety of results. The most common strategic motivation for starting postponement were to improve service level and to reduce inventory holding cost as a result of an increase in product variety. One of the key factors in successful implementation is product modularity. If a product is not inherently modular, a successful postponement strategy requires a redesign of the product or a rethinking of product definition. In the cases of small consumables, the end product is not a razor blade or a disk, but rather a finished configured package destined for a particular retail outlet. The relationship between forecast variability and the decision between a make-to- stock or a build-to-order strategy is also a common factor. Products with stable demand stand to gain little from a postponement strategy because there is little benefit for delaying production when sales are committed. On the other hand, products with high variability gain from postponement because there is no commitment to final configuration until the order is placed. A company should determine the location of variability when deciding to implement postponement. Variability can be caused by product variety, unreliability of customer orders, seasonality, trends, promotional activities, or it can be a result of the supply chain itself. Varia